XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-650008.png)
CAUTION: Do not slacken the rotor nut to engage the spring clip.
9. Fit rotor nut spring-clip.
a. Fit spring clip into the hub retaining holes and, if aligned, into the castellated slots of the rotor nut.
b. If the castellated slots of the rotor nut are not aligned it will be necessary to tighten the rotor nut further until the spring clip engages the slots.
10. Fit disc shield to vertical link.
a. Position disc shield.
b. Fit and tighten bolts.
11. Fit vertical link and hub assembly to vehicle.
Refer to Steering - Steering Knuckle - Service and Repair - Procedures See: Steering/Vertical Link/Service and Repair
12. Check wheel alignment and adjust if necessary.
Refer to Steering and Suspension - Alignment See: Alignment
