XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
21. Release both front engine mountings from crossbeam.
Remove bolt.
Repeat procedure to release opposite-side mounting.
22. CAUTION: Do not allow the weight of the hub assembly to hang on the ball-joints. Support the weight of the hubs before releasing the shock
absorbers.
Release both front shock absorbers from the lower mountings.
Remove nut and bolt.
Repeat procedure to release opposite-side shock absorber.
23. Release crossbeam rear mountings from chassis.
Remove mounting center bolt.
Repeat procedure to release opposite-side mounting.
24. With assistance, lower crossbeam, and place it on a workbench.