XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
Power Steering Line/Hose: Service and Repair
Hose - Reservoir to Pump
Hose - Reservoir to Pump
Removal
1. Open engine compartment and fit paintwork protection covers.
2. Place a drain pan under the pump.
3. Disconnect hose from pump.
-
Release clip.
-
Disconnect hose and allow it to drain.
-
Fit blanking plugs to pump and hose.
4. Disconnect hose from reservoir.
-
Release clip.
-
Disconnect hose.
-
Fit blanking plugs to reservoir stub pipe and hose.
-
Remove clips from hose.
5. Remove drain pan and discard fluid.
Installation
1. Installation is reverse of removal procedure.
-
Refill with new fluid and bleed air from the system.