XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
![background image](/jaguar/xkr_coupe_(x100)/v8-4.0l_sc_(aj27)/Page-913017.png)
8. Fit links to stabilizer bar.
Position link to stabilizer bar.
Fit and tighten nut: use an open-ended spanner on the ball-pin flats to prevent the rubber cover from twisting.
Repeat procedure to fit opposite-side link.
9. Fit steering rack to crossbeam.
Align steering rack to crossbeam.
Fit and tighten bolts.
10. Fit both tie-rod-ends to steering arms.
Insert tie-rod-end taper pin into steering arm.
Fit and tighten nut.
Repeat procedure to fit opposite-side, tie-rod-end.
11. CAUTION: To prevent damage to the crossbeam, place a piece of wood between the transmission jack and crossbeam.
With assistance, position crossbeam on jack, and align crossbeam to vehicle.