XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
/v8-4.0l_sc_(aj27)/Page-930008.png)
1. Using a hydraulic press, install new bearing cups in hub carrier.
-
Using special tool 100-013 and adapter 204-120, align bearing cup to hub carrier.
-
Align assembly to ram, and operate press to fully seat bearing cup.
-
Repeat procedure to fit other bearing cup.
2. Secure hub carrier in a vice.
3. Install pivot pin sleeve in hub carrier.
4. Pack new pivot bearings with Shell Retinax "A" grease.