XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
/v8-4.0l_sc_(aj27)/Page-930013.png)
16. Install locating collar and hub nut on axle shaft, but DO NOT tighten hub nut.
17. Tighten pivot pin nut to 90-110 Nm.
18. Install wheel speed sensor on hub carrier.
-
Position sensor on hub carrier and install and tighten bolt to 7-10 Nm.
-
Connect wheel speed sensor harness to sensor.
19. Using new tie strap, secure wheel speed sensor harness to hub carrier.
