Cherokee 2WD L4-150 2.5L VIN E TBI (1989)
Brake Pad: Service and Repair
Removal and Installation
Removal
REMOVAL
1. Discard two-thirds of the brake fluid from the master cylinder reservoirs, Do not drain the reservoirs completely.
2. Loosen the wheel lug nuts raise and support the front of the vehicle and remove both front wheels.
Releasing Pressure From Pads (Bottoming Piston)
3. Press the caliper piston to the bottom of the piston bore with a pry tool or C-clamp.
Remove Or Install Slide Pins
4. Remove the caliper mounting pins (1) and the caliper.