jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Trim Panel > < Headliner|Service and Repair|Page 3613
Page 1
background image

Sun Visor: Service and Repair

Sunvisor Removal/Installation

REMOVAL

1. Remove the screws that attach the sunvisor arm support bracket to the headliner and the roof panel.
2. Detach the sunvisor from the support clip.
3. Remove the sunvisor from the vehicle.
4. Remove the retaining screw and support clip.

INSTALLATION

1. Install the support bracket and the retaining screw. Tighten the screw to 1 Nm (9 in. lbs.) torque.
2. Position the sunvisor in the support clip and align the arm support bracket holes with the headliner holes.
3. Install the screws that attach the sunvisor arm support bracket to the headliner and the roof panel. Tighten the screws to 4 Nm (35 in. lbs.) torque.

Trim Panel > < Headliner|Service and Repair|Page 3613