Cherokee 2WD L4-150 2.5L VIN P MFI (1991)
4. Remove the retaining screws and serrated retainers, and remove the panel extension from the wheelhouse and quarter trim panels.
5. For 2-door vehicles, remove the retaining screws and remove the trim cover from the B-pillar.
C-Pillar Trim Cover - 4 Door Vehicles
6. For 4-door vehicles, remove the retaining screws and remove the trim cover from the C-pillar.
INSTALLATION
1. For 4-door vehicles, position the trim cover on the C-pillar and install the retaining screws. Tighten the screws to 1 Nm (11 in. lbs.) torque.
2. For 2-door vehicles, position the trim cover on the B-pillar and install the retaining screws. Tighten the screws to 1 Nm (11 in. lbs.) torque.
3. Position the quarter trim panel extension on the wheelhouse and quarter trim panels. Install the serrated retainers and retaining screws. Tighten the
screws to 1 Nm (11 in. lbs.) torque.
4. For 4-door vehicles, position the trim cover on the B-pillar. Install the retaining screws and tighten to 1 Nm (11 in. lbs.) torque.
5. Install the A-pillar trim, the headliner trim molding and the cowl side trim panel in the interior of the vehicle. Tighten the screws to 1 Nm (11 in.
lbs.) torque.
6. Position the inner scuff plate.
QUARTER TRIM PANEL EXTENSION REMOVAL
1. Remove the retaining screws and the inner scuff plate from the door sill.
Quarter Trim Panel Extension
2. Remove the retaining screws and serrated retainers, and remove the panel extension from the wheelhouse and quarter trim panels.
INSTALLATION
1. Position the quarter trim panel extension on the wheelhouse and quarter trim panels. Install the serrated retainers and retaining screws. Tighten the
screws to 1 Nm (11 in. lbs.) torque.
2. Position the inner scuff plate on the door sill. Install the retaining screws and tighten to 1 Nm (11 in. lbs.) torque.
AIR EXHAUST GRILLE REMOVAL
1. Pry the bottom edge of the grille from the door opening panel.
2. Pull downward and remove the grille from exhaust port in the door opening panel.