Cherokee 2WD L4-150 2.5L VIN P MFI (1991)
Front Shoulder Belt - 4 Door Vehicles
6. Remove the cap concealing the shoulder belt upper anchor bolt.
7. Use a Torx bit to remove the upper anchor bolt. Remove the support/guide washer.
8. Remove the inner scuff plate/trim panel from the door sill and remove the shoulder belt lower anchor bolt(s) with a Torx bit.
9. Remove the shoulder belt and the retractor.
INSTALLATION
1. Position the shoulder belt retractor in the shield and install the lower anchor bolt with a Torx bit.
2. Position the support/guide washer and shoulder belt upper anchor plate on the trim panel. Install the upper anchor bolt with a Torx bit.
3. Tighten the upper and lower anchor bolts to 41 Nm (30 ft. lbs.) torque.
4. Install the door sill inner scuff plate/trim panel and install the cap over the upper anchor bolt.
5. Install the shoulder belt buckle and anchor bolt. Connect the wire harness connectors. Tighten the buckle anchor bolt to 41 Nm (30 ft. lbs.) torque.
6. Position the cover over the anchor bolt.
REAR SHOULDER/LAP BELT/BUCKLE REMOVAL
1. Pull the rear seat release strap and tilt the seat cushion forward.
