Cherokee 2WD L4-150 2.5L VIN P MFI (1991)
Key Warning Buzzer/Contacts Removal
18. Remove the key warning buzzer switch and contacts as a unit. Use needle-nose pliers or a paper clip bent at a right angle (90 degrees).
Key/Lock Cylinder Removal
19. Turn ignition key/lock cylinder to the ON position. Insert a thin screwdriver into the slot adjacent to the switch attaching screw boss (right-hand
slot). Depress the spring latch located at the bottom of the slot to release the key/lock cylinder. Remove the cylinder.
INSTALLATION
Installation is the reverse of removal.