jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Relays and Modules - HVAC > < Radiator Cooling Fan Motor Relay|Specifications|Page 61
Page 1
background image

Radiator Cooling Fan Motor Relay: Service and Repair

REMOVAL

The auxiliary cooling fan is attached to the radiator upper crossmember behind the radiator.

Fig.38 Auxiliary Cooling Fan-4.0L-Typical

1. Remove the two fan mounting bolts from radiator upper crossmember.
2. Disconnect the electric fan connector.
3. Lift fan straight up and out of vehicle.

INSTALLATION

1. Align lower retaining tabs of fan shroud with slots in bracket at bottom of radiator. Push fan down into position.
2. Tighten the mounting bolts to 4 Nm (31 inch lbs.) torque.
3. Connect auxiliary cooling fan electrical connector.

Relays and Modules - HVAC > < Radiator Cooling Fan Motor Relay|Specifications|Page 61