Cherokee 2WD L6-4.0L VIN S (1998)
Removing/Installing Transmission Throttle Cable And Bracket
4. Install cable bracket on case and tighten attaching bolt to 10 Nm (7 ft. lbs.) torque.
5. Install pan and tighten pan bolts to 7 Nm (65 inch lbs.) torque.
6. Install new gasket on oil pan drain plug. Install and tighten plug to 20 Nm (15 ft. lbs.) torque.
7. Connect cable to engine bracket and throttle linkage.
8. Fill transmission with MOPAR Dexron/Mercon II.
9. Adjust the cable as described in cable adjustment procedure.