Cherokee 4WD L4-150 2.5L VIN P MFI (1991)
Door Lock Cylinder: Service and Repair
REMOVAL
1. Remove the door trim panel and waterdam.
Door Lock Cylinder/Latch
2. Disconnect the door latch-to-lock cylinder rod at the door latch.
3. If equipped, disconnect the security alarm switch connector from the lock cylinder.
Door Lock Cylinder Removal/Installation
4. Remove the key lock cylinder retainer clip. Remove the lock cylinder, gasket and clip from the door opening.
5. If applicable, remove the door latch-to-lock cylinder rod from the original lock cylinder. Connect it to the replacement lock cylinder.
INSTALLATION
1. Position the lock cylinder and gasket in the door opening. Hold the lock cylinder in the opening with the retainer clip.
2. Connect, the door latch-to-lock cylinder rod to the door latch.
3. If equipped, connect the security alarm switch connector to the lock cylinder.
4. Test" and, if necessary, adjust the door latch-to-lock cylinder rod operation.
5. Install the door trim panel and waterdam.
6. Adjust the door latch.