Cherokee 4WD L6-4.0L VIN S (1998)
Console: Service and Repair
Push Button Module
REMOVAL
1.
Remove the overhead console as described.
2.
Unplug the push button module wire harness connector from the trip computer, compass, and thermometer display module.
Push Button Module Remove/Install
3.
Remove the four screws that secure the push button module to the overhead console housing.
4.
Remove the push button module from the overhead console.
5.
Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N.m (20 in. lbs.).