Cherokee 4WD L6-4.0L VIN S (1998)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
REMOVAL
1. Remove air cleaner tube at throttle body
2. Disconnect electrical connector from IAC motor.
Fig. 36 Mounting Bolts (Screws)-IAC Motor
3. Remove two mounting bolts (screws) (Fig. 36).
4. Remove IAC motor from throttle body.
INSTALLATION
1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 Nm (60 in. lbs.).
3. Install electrical connector.
4. Install air cleaner tube to throttle body