Cherokee 4WD L6-4.0L VIN S (1998)
Headlamp Control Module: Service and Repair
Sentinel Headlamp Delay Module
REMOVAL
1. Remove the knee blocker.
Headlamp Delay Module
2. Remove the screw that attaches the module to the inside of the instrument panel.
3. Disconnect the wire harness connector and remove the module from the instrument panel.
INSTALLATION
1. Position the module inside the I/P and connect the wire harness connector to the module.
2. Install the screw that attaches the module to the inside of the instrument panel.
3. Install the knee blocker.