Cherokee 4WD L6-4.0L VIN S (1998)
Axle Seal Removal
12. Remove axle shaft seal from the end of the axle tube with a small pry bar.
NOTE: The seal and bearing can be removed at the same time with the bearing removal tool.
Axle Shaft Bearing Removal Tool
13. Remove the axle shaft bearing from the axle tube with Bearing Removal Tool Set 6310, using Adapter Foot 6310-9.
INSTALLATION
NOTE: Do not install the original axle shaft seal. Always install a new seal.
14. Wipe the axle tube bore clean. Remove any old sealer or burrs from the tube.