Cherokee 4WD L6-4.0L VIN S (1998)
Pinion Rear Bearing Cup Installation
2. Install the pinion rear bearing cup with Installer C-4308 and Driver Handle C-4171.
3. Ensure cup is correctly seated.
4. Apply Mopar"R" Door Ease, or equivalent, stick lubricant to outside surface of bearing cup.
Pinion Front Bearing Cup Installation
5. Install the pinion front bearing cup with Installer D-130 and Handle C-4171.
6. Install pinion front bearing, and oil slinger, if equipped.
Pinion Seal Installation
7. Apply a light coating of gear lubricant on the lip of pinion seal. Install seal with Installer C-4076-B and Handle C-4735-1.
