Cherokee 4WD V6-173 2.8L VIN W 2-bbl (1985)
Display Module Replacement
1.
Remove the instrument panel overlay.
2.
Remove the cluster and display module attaching screws.
3.
Disconnect the display module wires.
4.
Remove the display module from the bezel.
5.
Install and connect the replacement display module.
6.
Install the instrument panel overlay.
Remote Module Replacement
1.
Disconnect the remote module wires.
2.
Remove the screws attaching the remote module bracket to the instrument panel.
3.
Remove the remote module.
4.
Remove the remote module-to-support bracket screws.
5.
Attach the replacement remote module to the support bracket.
6.
Mount the remote module on the instrument panel and connect the module wires.
Filing Instructions
Record this I.S. Note on the index page of Chapter C-Electrical in M.R. 244 and file it in the M.R. 244 binder.
