Cherokee 4WD V6-173 2.8L VIN W 2-bbl (1985)
Ignition Lock: Technical Service Bulletins
Ignition Key - Cutting Information
84amcjeep01
SEPTEMBER 1984 000 241
1985 JEEP/EAGLE MODELS
19E
IGNITION KEY
Attention: Workshop, Parts Department
IGNITION KEY CUTTING INFORMATION
Information
All 1985 Jeep and Eagle models use a new ignition key with letter code J. Code J key blanks are not interchangeable with code L key blanks used on
1984 and prior models.
The following Curtis key cutting equipment is required to cut code J ignition keys.
NOTE:
A code book update is available from Curtis Industries,
Carriage
Cam Set
Punch and Anvil
GM-2
GM-1
45~
Part number for the new code J ignition key blank is 8983 501 972.
Filing Instructions
Record this I.S. Note on page G-15 of the M.R. 244, page G-48 of the M.R. 251 and of the M.R. 252 and on page G-50 of the M.R. 253. File this I.S.
Note in your M.R. 171 binder.