jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Sun Visor|Service and Repair|Page 5438 > < Passenger Assist Handle|Service and Repair
Page 1
background image

Sun Visor: Service and Repair

SUN VISOR 

REMOVAL 

Fig. 16

Fig. 17

1. Remove the screws that attach the sunvisor arm support bracket to the headliner and the roof panel (Fig. 16) and (Fig. 17).
2. Disconnect vanity lamp connector, if equipped.
3. Detach the sunvisor from the support clip.
4. Remove the sunvisor from the vehicle.
5. Remove the retaining screw and support clip. On vehicles equipped with an overhead console, the support clip is integral with the overhead

console.

INSTALLATION 

1. Install the support bracket and the retaining screw.
2. Connect vanity lamp connector, if equipped.

Sun Visor|Service and Repair|Page 5438 > < Passenger Assist Handle|Service and Repair