jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Drive Belt|Specifications|Page 1276 > < Drive Belt|Specifications
Page 1
background image

Drive Belt: Testing and Inspection

VISUAL DIAGNOSIS 

When diagnosing serpentine accessory drive belts, small cracks that run across the ribbed surface of the belt from rib to rib (Fig. 1), are considered
normal. These are not a reason to replace the belt. However, cracks running along a rib (not across) are not normal. Any belt with cracks running along
a rib must be replaced (Fig. 1). Also replace the belt if it has excessive wear, frayed cords or severe glazing.
Refer to the Accessory Drive Belt Diagnosis charts for further belt diagnosis. 

NOISE DIAGNOSIS 
Noises generated by the accessory drive belt are most noticeable at idle. Before replacing a belt to resolve a noise condition, inspect all of the
accessory drive pulleys for alignment, glazing, or excessive end play.

Drive Belt|Specifications|Page 1276 > < Drive Belt|Specifications