jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Charging System > < Diagram Information and Instructions|Page 1473
Page 1
background image

Neutral Safety Switch: Service and Repair

1981-87 MODELS

1.

Disconnect battery ground cable.

2.

Raise and support vehicle.

3.

Disconnect electrical connector from switch and remove switch from transmission. Allow transmission fluid to drain into a suitable container.

4.

Move selector lever to Park and Neutral positions. Check switch operating fingers for proper operation.

5.

Reverse procedure to install. Correct transmission fluid level as required.

Charging System > < Diagram Information and Instructions|Page 1473