Comanche 2WD L4-150 2.5L VIN E TBI (1989)
FIGURE 1
FIGURE 2
REPAIR PROCEDURES
1.
Locate the Electronic Engine Control (EEC) Harness Connector (A) under hood. The connector can be found on the right wheel well near the fuel
pump and B+ latch relays on Cherokee, Wagoneer and Comanche models, and between the battery and charcoal canister on Wrangler models.
NOTE:
FOR THE WRANGLER, THE CONNECTOR (A) WILL BE A 4 TERMINAL CONNECTOR (FIGURE 1). THE CONNECTOR (A)
FOR THE CHEROKEE, WAGONEER AND COMANCHE WILL BE A 6 TERMINAL CONNECTOR (FIGURE 2).