Comanche 2WD L4-150 2.5L VIN E TBI (1989)
![background image](/jeep/comanche_2wd/l4-150_2.5l_vin_e_tbi/Page-1043001.png)
Starter Drive/Bendix: Testing and Inspection
Magnetic Switch Hold In Test
This test must be performed in less than 10 seconds to prevent coil from burning.
1.
Disconnect field coil wire from M terminal of magnetic switch.
2.
Connect a 12 volt battery between S terminal and body.
3.
If pinion remains out, system is satisfactory.
4.
If pinion moves in, hold-in circuit is open. Replace magnetic switch.