Removal of Water Pump - Comanche 2WD L6-242 40L VIN S MFI (1992)
![background image](/jeep/comanche_2wd/l6-242_4.0l_vin_s_mfi/Page-464009.png)
horizontally, silicone fluid in viscous fan drive could drain into its bearing assembly and contaminate lubricant.
Fig. 10 Water Pump Remove/Install - Typical
15. Remove the four pump mounting bolts and remove pump from vehicle. Discard old gasket. Note that one of the four bolts is longer than the other
bolts.
16. If pump is to be replaced, the heater hose fitting must be removed. Note position of fitting before removal.