Comanche 4WD L4-150 2.5L VIN E TBI (1989)
![background image](/jeep/comanche_4wd/l4-150_2.5l_vin_e_tbi/Page-654001.png)
Shift Light: Testing and Inspection
1.
Turn ignition switch to run position.
2.
Ground pin 7 of connector B.
3.
If indicator illuminates, replace bulb.
4.
Turn ignition switch to Off position.
5.
Check for continuity between connector B pin 2 and pin 54 of engine controller.
6.
If no continuity exists, repair open in circuit.