Comanche 4WD L4-150 2.5L VIN H TBI (1986)
RETAINER AND THE QUICK-CONNECTING FITTING ASSEMBLY
C.
Install the retainer assembly (G) by pushing the assembly into the quickconnect fitting (D) until a "click" is heard.
FITTING AND PLASTIC PLUG
D.
Grasp the disposable plastic plug (H) and remove it from the fitting (D).
NOTE:
By removing only the plastic plug
(H)
the O-rings, spacer, and retainer will remain in the fitting.
FUEL LINE AND FITTING CONNECTION
E.
Push the fuel line (B) into the fitting (D) until a "click" is heard and the connection is complete.
FUEL LINES
3.
Verify that the quick-connect fitting assembly fits securely over the fuel lines by giving the fuel lines a firm tug.
SRT/TIC INFORMATION
OPERATION DESCRIPTION
NUMBER
SRT
TIC
CO. COUPLING/QUICK-CONNECT/
O-RING - REPLACEMENT
0102
0.2
1-801
FILING INSTRUCTIONS
Record this information on page B-36, B-37, and B-39, file it in the MR 277 manual.