Comanche 4WD L4-150 2.5L VIN H TBI (1986)
Suspension Strut / Shock Absorber: Service and Repair
Rear
1. Raise vehicle and support rear axle with a suitable jack.
2. Raise jack slightly, then remove upper shock mount to body retaining bolts.
3. Remove lower retaining nut and washer, then the shock absorber.
4. Reverse procedure to install. Torque upper retaining bolts to 15 ft. lbs. and lower retaining nut to 44 ft. lbs. If vehicle is equipped with
Automatic Load Leveling System, disconnect lines from shock absorber before removing.