Comanche 4WD L6-242 4.0L VIN L FI (1990)
![background image](/jeep/comanche_4wd/l6-242_4.0l_vin_l_fi/Page-1084003.png)
-
The measurement should also be repeated at various depths of the drum to check for a bellmouth condition. If the measurements differ by more
than 0.010 inches the drum should be resurfaced.
NOTE: 1 inch = 25.4mm, so if your micrometer measures in inches and the specified thickness on the disc is in millimeters, convert millimeters
to inches by dividing the specified number of millimeters by 25.4.
Example: Specification on disc is 17.8 mm.
Dividing 17.8mm by 25.4mm/in = 17.8/25.4 = 0.70 inches.
WARNING: If one brake drum is machined, the other should also be machined to the same diameter to maintain equal braking forces.