Comanche 4WD L6-242 4.0L VIN L FI (1990)
Figure 1
1.
Find the fuse panel located beneath the instrument panel to the left of the steering column.
2.
Locate the 10 amp fuse cavity next to the turn signal flasher. The cavity is located between the words PWR ACC and CLOCK. The word
CLOCK will likely be blocked out (Figure 1).
3.
If the cavity contains a red 10 amp fuse,no furtheraction is required.
4.
If the cavity is empty, install a 10 amp blade-type fuse.
Completion Reporting and Reimbursement
Claims for vehicles which have been serviced must be submitted on the DIAL System. Claims submitted will be used by Chrysler to record recall service
completions and provide dealer payments.
Use the following labor operation number and time allowance:
Labor Operation
Time
Number
Allowance
Inspect for/install fuse for EMT circuit.
08297282
0.2 Hour
Add the cost of a fuse (if purchased) plus applicable dealer allowance to your claim.
Note:
See Warranty Policy and Procedure Manual, Chapter 6, Subsection H, For complete recall claim processing instructions.
Parts Return
Not applicable.
Vehicle Not Available
If a vehicle is not available for this service for a known reason, let us know by filling out the pre-addressed Vehicle Disposition Form portion of the
Owner Recall Notification Form or describe the reason on a postcard and mail to:
Chrysler Corporation 416-15-19 Recall Coordination P.O. Box 1919 Detroit, Michigan 48231-9986
Following the above procedures will expedite the processing of your claim.
If you have any questions or need assistance in completing this action, please contact your Zone Service Office.
Owner Letter
EMISSIONS RECALL --
1990 JEEP COMANCHE, CHEROKEE, AND WAGONEER MODELS
Dear Jeep Vehicle Owner:
Recently we learned that a fuse may have been omitted from the emissions maintenance timer circuit of your vehicle. This circuit operates to activate a
light on the instrument panel as a reminder for you to have certain emissions components serviced. For this reason, and to assure that your vehicle
complies with government regulations, we ask that you perform the easy task of installing the fuse, which is attached to the enclosed Owner Recall
Notification Form. This will keep you from being inconvenienced by having to return your vehicle to your dealer. Instructions for installing the fuse are