Commander 2WD V6-3.7L (2009)
Front Fender Liner: Service and Repair
Splash Shield - Removal
REMOVAL
Front
1. If required remove wheel.
2. Remove the pushpins (2).
3. Remove the rivets (3).
4. Remove the eight rivets attaching the liner to the wheel flare molding . See: Exterior Moulding / Trim/Service and Repair/Body Side Molding -
Removal
5. Remove liner (1).
Rear
1. If required remove wheel.
2. Remove the pushpins (2).
3. Remove the rivets (3).
4. Remove the rivets attaching the liner to the wheel flare molding . See: Exterior Moulding / Trim/Service and Repair/Body Side Molding -
Removal
5. Remove liner (1).