Commander 2WD V6-3.7L (2009)
Sunroof / Moonroof Switch: Description and Operation
Sunroof Switch - Operation
OPERATION
The power sunroof switch is hard wired to the sunroof motor/module assembly. The switch receives battery current from the motor/module when the
ignition switch is in the RUN and ACCESSORY positions or the vehicle Accessory Delay System is active. When one of the switch positions is pressed
it sends battery current back to the motor/module, signaling it to move the power sunroof to the appropriate position. The motor/module will perform one
of the following functions:
-
Power sunroof open (right side of switch pushed)
-
Power sunroof closed (left side of switch pushed)
-
Power sunroof vent (switch center button pushed)