Commander 2WD V6-3.7L (2009)
INSTALLATION
1. Install the engine mount (1).
2. Tighten the bolts to 30 Nm ( 22 ft.lbs.).
3. Lower the engine.
4. Install the through bolts and nuts.
5. Lower vehicle.
6. Connect negative battery cable.
INSTALLATION
1. Install the engine mount (1).
2. Tighten the bolts to 30 Nm ( 22 ft.lbs.).
3. Lower the engine.
4. Install the through bolts and nuts.
5. Lower vehicle.
6. Connect negative battery cable.