Commander 2WD V6-3.7L (2009)
UPPER VALVE BODY SECTION 1
8. Lubricate and install the sector valve (1).
9. Lubricate and install 3-4 Holding Pressure Shift Valve assembly (2), 3-4 Command Valve assembly (3), 3-4 Shift Pressure assembly (4) and the
3-4 Overlap Regulating Valve Sleeve and Piston assembly (5) into the valve body.
10. Install the side cover and the screws holding the side cover (6) to the valve body and valve housing. Tighten the screws to 4 Nm (35 in.lbs.).
NAG1 VALVE BODY SPRING DIMENSION
