Commander 2WD V6-3.7L (2009)
22. Install the solenoid valves (6 - 11) into shift plate (13).
NOTE: Check O-rings on solenoid valves for damage and replace if necessary.
23. Install the leaf springs (5).
24. Install the Torx(R) socket bolts (3, 4). Tighten the bolts to 8 Nm (71 in.lbs.).
NOTE: Pay attention to the different lengths of the Torx(R) socket bolts.
25. Install the solenoid caps (1, 2) if equipped.
26. Install the electrohydraulic unit into the vehicle.