jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Trunk / Liftgate Striker|Adjustments|Page 7593 > < Trunk / Liftgate Shock / Support|Service and Repair|Page 7589

Commander 2WD V6-3.7L VIN K (2006)

Page 1
background image

Trunk / Liftgate Striker: Adjustments

ADJUSTMENTS

1. Using a grease pencil or equivalent, mark the position of the striker (1) to aid in adjustment.
2. Loosen the striker bolts (2).
3. Change the striker position to adjust the lower lift-gate gap and flush measurement. 
4. Tighten the bolts to 28 N.m (21 ft.lbs).

Trunk / Liftgate Striker|Adjustments|Page 7593 > < Trunk / Liftgate Shock / Support|Service and Repair|Page 7589