Commander 2WD V6-3.7L VIN K (2006)
Front Fender Liner: Service and Repair
LINER-FENDER & QUARTER PANEL
REMOVAL
Front
1. If required remove wheel.
2. Remove the pushpins (2).
3. Remove the rivets (3).
4. Remove the eight rivets attaching the liner to the wheel flare molding.
5. Remove liner (1).
Rear
1. Install the liner (1).
2. Install the rivets attaching the flare molding to the wheel liner.
3. Install the pushpins (2).
4. Install new rivets. rivets (3).
5. If required install the wheel.
INSTALLATION
Front
