Commander 2WD V6-3.7L VIN K (2006)
![background image](/jeep/commander_2wd/v6-3.7l_vin_k/Page-2272029.png)
8. Position the seat into the vehicle and align the front hooks with the strikers (4).
9. Position the rear of the seat over the rear studs and locator pins (1).
10. Install the center nut and bolt (2) and tighten to 50 N.m (37 ft.lbs).
11. Install the outer nuts (3) and tighten to 50 N.m (37 ft.lbs).
12. Position the lower trim (1) and seat the retaining clips fully.