Commander 2WD V6-3.7L VIN K (2006)
![background image](/jeep/commander_2wd/v6-3.7l_vin_k/Page-2415002.png)
4. Disconnect the motor electrical connector.
5. Remove the fasteners holding the motor to the seat adjuster (1).
6. Remove motor from seat adjuster (2).
INSTALLATION
1. Position motor (1) on seat adjuster (2).
4. Disconnect the motor electrical connector.
5. Remove the fasteners holding the motor to the seat adjuster (1).
6. Remove motor from seat adjuster (2).
INSTALLATION
1. Position motor (1) on seat adjuster (2).