Commander 2WD V6-3.7L VIN K (2006)
Brake Caliper: Service and Repair
Rear
Brake Caliper
DISC BRAKE CALIPERS
REMOVAL
REAR
1. Raise and support vehicle.
2. Remove rear wheel and tire assembly.
3. Drain small amount of fluid from master cylinder brake reservoir with a clean suction gun.
4. Bottom caliper pistons into the caliper by prying the caliper over.
5. Remove brake hose (3) banjo bolt (5) and discard gasket washers.
6. Remove the caliper slide pins (4).
7. Remove caliper (1) from the anchor.
8. Remove the brake pads.
DISASSEMBLY