Commander 2WD V6-3.7L VIN K (2006)
14. Remove the 2 front cable routing clamps and the 3 nuts (2&4).
15. Remove the front cable at the rear floor bracket.
16. Remove the front cable (3) at the hand lever (1).
17. Remove the front cable at the hand lever mounting bracket.
INSTALLATION
1. Install the front cable (3) at the hand lever mounting bracket (1).
2. Install the front cable (3) at the hand lever (1).
3. Install the front cable at the rear floor bracket.
4. Install the 2 front cable routing clamps and the 3 nuts (2&4).