Commander 2WD V6-3.7L VIN K (2006)
Wheel Speed Sensor: Service and Repair
Front
SENSOR-FRONT WHEEL SPEED
REMOVAL
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly
3. Remove the caliper adaptor bolts. Support the caliper and adaptor assembly Do Not let assembly hang by the hose.
4. Remove the disc brake rotor.
5. Remove the front wheel sensor mounting nut (2) to the hub (3).
6. Remove the wheel speed sensor (1) from the hub (3).
7. Disconnect the wire sensor routing clips (2).
8. Disconnect the wheel speed sensor wire connector M.
9. Remove the sensor and wire.
INSTALLATION