Commander 2WD V6-3.7L VIN K (2006)
6. Remove both left and right side engine mount through bolts (3).
7. Raise engine using special tool # 8534 (1), to provide clearance to remove oil pan.
8. Drain engine oil and remove oil filter.
NOTE: Do not pry on oil pan or oil pan gasket. Gasket is mounted to engine and does not come out with oil pan.
9. Remove the oil pan mounting bolts and oil pan.
10. Unbolt oil pump pickup tube and remove tube and oil pan gasket from engine.
CLEANING
1. Clean oil pan in solvent and wipe dry with a clean cloth.
2. Clean the oil pan gasket surface. DO NOT use a grinder wheel or other abrasive tool to clean sealing surface.
3. Clean oil screen and tube thoroughly in clean solvent.
INSPECTION