Commander 2WD V6-3.7L VIN K (2006)
![background image](/jeep/commander_2wd/v6-3.7l_vin_k/Page-1758002.png)
2. Install the two screws (4) that secure the rear mode door actuator (2) to the rear HVAC housing (1). Tighten the screws to 2 N.m (17 in. lbs.).
3. Connect the rear HVAC wire harness connector (2) to the rear mode door actuator.
4. Install the rear HVAC housing.
5. Initiate the Actuator Calibration function using a scan tool.