Commander 2WD V6-3.7L VIN K (2006)
![background image](/jeep/commander_2wd/v6-3.7l_vin_k/Page-1687001.png)
Steering Wheel: Service and Repair
STEERING WHEEL
REMOVAL
1. Disable and remove the drivers side airbag (1).
2. Disconnect all the electrical connectors (2,6 & 7).
3. Partially remove the steering wheel bolt and leave the bolt in the column.
4. Install puller (2) or equivalent using the top of the bolt to push on.
NOTE: Ensure the bolts are threaded firmly into the steering wheel.
5. Remove the steering wheel.
INSTALLATION