Commander 2WD V6-3.7L VIN K (2006)
![background image](/jeep/commander_2wd/v6-3.7l_vin_k/Page-1696001.png)
Front Cross-Member: Service and Repair
CROSSMEMBER-ENGINE CRADLE
REMOVAL
1. Support engine using engine support fixture No. 8534 or equivalent.
2. Remove the front skid plates.
3. Remove the rotors.
NOTE: Do not twist the boot anytime during removal or installation.
4. Remove the outer tie rod end (2) nut (1) from the ball stud.