Commander 2WD V6-3.7L VIN K (2006)
Stabilizer Bushing: Service and Repair
Front Suspension
STABILIZER BAR TO FRAME BUSHING
REMOVAL
1. Raise and support the vehicle.
2. Remove the front splash shield.
3. Remove the two stabilizer bar retainer bracket bolts (2).
4. Remove the bushing clamp (2).
5. Remove the stabilizer bar bushing (3).
INSTALLATION
1. Install the stabilizer bar bushing (3) to the bar (1).
2. Install the stabilizer bar bushing retainer bracket (2) bolts and tighten the two mounting bolts.
3. Install the front splash shield.
4. Lower the vehicle.