Commander 2WD V6-3.7L VIN K (2006)
8. Remove all bolts (2) holding the shifter assembly (1) to the floor pan.
9. Remove the shifter assembly (1) from the vehicle.
INSTALLATION
1. Install shifter assembly (1) in position on the floor pan.
2. Install the bolts (2) to hold the shifter assembly (1) onto the floor pan. Tighten bolts to 12 Nm (105 inch lbs.).
3. Place the floor shifter lever in PARK position.
4. Loosen the adjustment nut (2) on the shifter assembly (1).
